INTEGRAL + is a logic control system, electric actuator, the actuator control system is the basic unit, with automatic calibration phase, out of phase alarms, motor overheat protection, over-torque protection, local control switch, remote local choice, and so on, the user can be Select the voltage control (10-250V AC and DC) 
 POSIGAM + is based on an increase in the INTEGRAL + location and position of the output components of the control circuits to control the regulation of type Ⅲ electric actuator, the control precision of 2%. The control system is characterized by simple and reliable control signal type (such as 4-20mA or 0-10V) and so on. 

 MINIGRAL + Simple integrated control 

 Specifically for single-phase power supply of the actuator control system integration, small size, simple structure, can perform basic control functions. There are switch-type (Minigral +), adjust the type III (Minigam +) 



 Has the following features 

 1, intelligent protection 

 In the heat, cold, over torque, speed and other circumstances overrun with various self-diagnostic functions, such as when the actuator control process occurring at a rate in the anomaly, the monitor alarm and continue to prohibit motor power. 

 When the actuator control signal is lost, the actuator operating status can book (stay in place, fully open, fully closed, anywhere 0-100%) 

 The machine also has automatic detection, recovery, alarm functions, such as the actuator motor stall protection automatically when the state and output alarm contact signal, local splash screen alarm. 

 2, stability: the use of the French Bernard sensor control board, circuit, Siemens precision conductive plastic potentiometer input-output chip uses a 12 bit A / D and D / A converter. 

 3, the auto-calibration: the valve zero and span settings, sampling potentiometer in the effective area as long as you can, without precise adjustment potentiometer, input calibration code, the implementing agencies under the valve will be automatically credited to the "all off" and "fully open" position 

 4, the actuator with a digital display window, a row of (green) shows the control codes or input control signal value, the next row (red) shows the valve position value, actuator failures prompted the state. 

 5, "Zero," "full range" of the position can be set, range set range of values ??can be set to zero in the 0-75% set 100% full, 25-degree. 

 6, using the EPROM to store user settings, calibration data, power-down after the permanent preservation. 

 7, with dynamic braking function, inhibition of the shock caused by the system, make the system stable and reliable. 

 8, the actuator drive motor with high reliability, smooth running, soft shipment characteristics, torque, and a single anti-stall, three-phase AC servo motor. 

 9, three phase actuator with automatic phase correction function and 

 10, the interference pattern can be set: According to the site of interference, the interference pattern can be set to different 

 11, the circuit can be added PID control function 

 12, intelligent electric actuator also has a local control, the scene was not the infrared remote control, can be controlled by the machine